Question: The values of h parameter of a transistor in CE arrangement are ____________ arrangement?

• 1. The same as for CB
• 2. The same as for CC
• 3. Different from that in CB
• 4. None of the above

Question: The hfe parameter is called ______________in CE arrangement with output shorted?

• 1. Voltage gain
• 2. Current gain
• 3. Input impedance
• 4. None of the above

Question: If the operating point changes, the h parameters of transistor_____________?

• 1. Also change
• 2. Do not change
• 3. May or may not change
• 4. None of the above

Question: The dimensions of hie parameter are _______________?

• 1. Mho
• 2. Ohm
• 3. Farad
• 4. None of the above

Question: There are ______________ h parameters of a transistor?

• 1. Two
• 2. Four
• 3. Three
• 4. None of the above

Question: A transistor behaves as a linear device for _____________?

• 1. Small signals only
• 2. Large signals only
• 3. Both small and large signals
• 4. None of the above

Question: The h parameter approach gives correct results for_______________?

• 1. Large signals only
• 2. Small signals only
• 3. Both small and large signals
• 4. None of the above

Question: Hybrid means_____________?

• 1. Mixed
• 2. Single
• 3. Unique
• 4. None of the above

Question: In CE arrangement, the value of input impedance is approximately equal to ______________?

• 1. Hie
• 2. Hoe
• 3. Hre
• 4. None of the above

Question: Rotor of a motor is usually supported on ___________________ bearings?

• 1. ball or roller
• 2. needle
• 3. bush
• 4. thrust