Civil Engineering Mcqs
Question: In case of an airfoil, the separation of flow occurs________________?
- 1. at the extreme rear of body
- 2. at the extreme front of body
- 3. midway between rear and front of body
- 4. any where between rear and front of body depending upon Reynolds number
Question: The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be_________________?
- 1. 0.423 D
- 2. 0.577 D
- 3. 0.223 D
- 4. 0.707 D
Question: If x is the distance from leading edge, then the boundary layer thickness in laminar flow varies as________________?
- 1. x
- 2. x
- 3. x
- 4. x/7
Question: For a sphere of radius 15 cm moving with a uniform velocity of 2 m/sec through a liquid of specific gravity 0.9 and dynamic viscosity 0.8 poise, the Reynolds number will be_________________?
- 1. 300
- 2. 337.5
- 3. 600
- 4. 675
Question: The discharge over a broad crested weir is maximum when the depth of flow is_______________?
- 1. H/3
- 2. H/2
- 3. 2 H/5
- 4. 2 H/3
Question: Which of the following has highest coefficient of discharge ?
- 1. sharp edged orifice
- 2. venturimeter
- 3. Borda’s mouthpiece running full
- 4. CipoUetti weir
Question: The major loss of energy in long pipes is due to_______________?
- 1. sudden enlargement
- 2. sudden contraction
- 3. gradual contraction or enlargement
- 4. friction
Question: Coefficient of velocity for Borda’s mouth piece running full is________________?
- 1. 0.611
- 2. 0.707
- 3. 0.855
- 4. 1.00
Question: The pressure at the summit of a syphon is_______________?
- 1. equal to atmospheric
- 2. less than atmospheric
- 3. more than atmospheric
- 4. none of the above
Question: Due to each end contraction, the discharge of rectangular sharp crested weir is reduced by________________?
- 1. 5%
- 2. 10%
- 3. 15%
- 4. 20%