Civil Engineering Mcqs
Question: Seepage through embankments in an earthen dam is controlled by_______________?
- 1. drainage filters
- 2. relief wells
- 3. drain trenches
- 4. provision of downstream berms
Question: As compared to gravity dams, earthen dams__________________?
- 1. are costlier
- 2. are less susceptible to failure
- 3. require sound rock foundations
- 4. require less skilled labour
Question: The maximum permissible eccentricity for no tension at the base of a gravity dam is__________________?
- 1. B/2
- 2. B/3
- 3. B/4
- 4. B/6
Question: The major resisting force in a gravity dam is___________________?
- 1. water pressure
- 2. wave pressure
- 3. self-weight of dam
- 4. uplift pressure
Question: Horizontal acceleration due to earthquake results in______________?
- 1. hydrodynamic pressure
- 2. inertia force into the body of the dam
- 3. both (A) and (B)
- 4. none of the above
Question: The total capacity of a reservoir is 25 million cubic metres and dead storage is 5 million cubic metres. If the average volume of sediment deposition is 0.10 million cubic metre per year, then the usefulness of the reservoir will start reducing after_____
- 1. 50 years
- 2. 150 years
- 3. 200 years
- 4. 250 years
Question: For a flood control reservoir, the effective storage is equal to_______________?
- 1. useful storage – valley storage
- 2. useful storage + surcharge storage
- 3. useful storage + surcharge storage + valley storage
- 4. useful storage + surcharge storage -valley storage
Question: The useful storage is the volume of water stored in the reservoir between________________?
- 1. minimum pool level and maximum pool level
- 2. minimum pool level and normal pool level
- 3. normal pool level and maximum pool level
- 4. river bed and minimum pool level
Question: A deep well_________________?
- 1. is always deeper than a shallow well
- 2. has more discharge than a shallow well
- 3. is weaker structurally than a shallow well
- 4. both (A) and (B)
Question: If d is the depth of the aquifer through which water is flowing, then the relationship between permeability k and transmissible T is given by_______________?
- 1. T = kd
- 2. T = k/d
- 3. T= Vkd
- 4. k= VTd