pKmcqsquiz

Electrical Engineering Mcqs

Pagination on API result
Question: At series resonance, the circuit offers____________ impedance?
  • 1. Zero
  • 2. Maximum
  • 3. Minimum
  • 4. None of the above
Question: A tuned amplifier is generally operated in ____________operation?
  • 1. Class A
  • 2. Class C
  • 3. Class B
  • 4. None of the above
Question: The first goal to accomplish in analyzing a complex series-parallel circuit is to____________?
  • 1. solve for all the voltage drops
  • 2. solve for the total current and resistance
  • 3. equate all series components
  • 4. equate all parallel components
Question: The positive (+) and negative (-) ends of the battery are called ___________?
  • 1. circuit diagram
  • 2. battery knobs
  • 3. battery terminals
  • 4. battery sides
Question: When a Wheatstone bridge is in a balanced condition, the center voltmeter in the bridge will read_____________?
  • 1. twice the source voltage
  • 2. half the source voltage
  • 3. zero volts
  • 4. the same as the source voltage
Question: In a series–parallel circuit, individual component power dissipation are calculated using_____________?
  • 1. individual component parameters
  • 2. a percent of the total power depending on resistor ratios
  • 3. total current squared multiplied by the resistor values
  • 4. a percent of the voltage division ratio squared
Question: In a series–parallel circuit consisting of R1 and R2 in series and connected in parallel with R3, if R1 opens, then R2‘s voltage will:___________?
  • 1. increase
  • 2. remain the same
  • 3. decrease
  • 4. cannot tell
Question: The current flowing through an unloaded voltage divider is called the____________?
  • 1. bleeder current
  • 2. load current
  • 3. resistor current
  • 4. voltage current
Question: With 21 V applied, if R1 = 5 ohms, R2 = 35 ohms, and R3 = 14 ohms, what is the current of R2 if R1 is series connected with parallel circuit R2 and R3?
  • 1. 200 mA
  • 2. 400 mA
  • 3. 600 mA
  • 4. 800 mA
Question: If R1 is in series with parallel connected to R2 and R3, what happens to total current if R2 opens?
  • 1. cannot tell
  • 2. remains the same
  • 3. increases
  • 4. decreases

Search

Category

Subjects