pKmcqsquiz

Electrical Engineering Mcqs

Pagination on API result
Question: As compared to a lead-acid cell, the efficiency of a nickel-iron cell is less due to its__________?
  • 1. compactness
  • 2. lower e.m.f.
  • 3. small quantity of electrolyte used
  • 4. higher internal resistance
Question: In a lead-acid cell dilute sulfuric acid (electrolyte) approximately comprises the following__________?
  • 1. one part H2O, three parts H2SO4
  • 2. two parts H2O, two parts H2SO4
  • 3. three parts H2O, one part H2SO4
  • 4. all H2S04
Question: Those substances of the cell which take active part in chemical combination and hence produce electricity during charging or discharging are known as________materials:
  • 1. passive
  • 2. active
  • 3. redundant
  • 4. inert
Question: During the charging and discharging of a nickel-iron cell____________?
  • 1. corrosive fumes are produced
  • 2. water is neither formed nor absorbed
  • 3. nickel hydroxide remains unsplit
  • 4. its e.m.f. remains constant
Question: A dead storage battery can be revived by___________?
  • 1. adding distilled water
  • 2. adding so-called battery restorer
  • 3. a dose of H2SO4
  • 4. none of the above
Question: Five 2 V cells are connected in parallel. The output voltage is__________?
  • 1. 1 V
  • 2. 1.5 V
  • 3. 1.75 V
  • 4. 2 V
Question: As compared to constant-current system, the constant-voltage system of charging a lead acid cell has the advantage of___________?
  • 1. reducing time of charging
  • 2. increasing cell capacity
  • 3. both (A) and (B)
  • 4. avoiding excessive gassing
Question: The capacity of a battery is expressed in terms of____________?
  • 1. current rating
  • 2. voltage rating
  • 3. ampere-hour rating
  • 4. none of the above
Question: Cells are connected in series in order to_____________?
  • 1. increase the voltage rating
  • 2. increase the current rating
  • 3. increase the life of the cells
  • 4. none of the above
Question: The best indication about the state of charge on a lead-acid battery is given by____________?
  • 1. output voltage
  • 2. temperature of electrolyte
  • 3. specific gravity of electrolyte
  • 4. none of the above

Search

Category

Subjects