Question: The stress developed in a material at breaking point in extension is called__________?

• 1. Breaking stress
• 2. Fracture stress
• 3. Yield point stress
• 4. Proof stress

Question: In the lever of third order, load W, effort P and fulcrum F are oriented as follows_________________?

• 1. W between P and F
• 2. F between W and P
• 3. P between W and F
• 4. W, P and F all on one side

Question: Cylindrical cams can be classified as_________________?

• 1. circular
• 2. tangent
• 3. reciprocating
• 4. none of the above

Question: A circle passing through the pitch point with its center at the center of cam axis is known as___________________?

• 1. pitch circle
• 2. base circle
• 3. prime circle
• 4. outer circle

Question: Cam size depends upon__________________?

• 1. base circle
• 2. pitch circle
• 3. prime circle
• 4. outer circle

Question: The maximum value of the pressure angle in case of cam is kept as________________?

• 1. 10°
• 2. 14°
• 3. 20°
• 4. 30°

Question: Klein’s construction is useful to determine__________________?

• 1. velocity of various parts
• 2. acceleration of various parts
• 3. displacement of various parts
• 4. angular acceleration of various parts

Question: The sense of Corioli’s component is such that it_________________?

• 1. leads the sliding velocity vector by 90°
• 2. lags the sliding velocity vector by 90°
• 3. is along the sliding velocity vector
• 4. leads the sliding velocity vector by 180°

Question: The number of centers in a crank driven slider crank mechanism are_______________?

• 1. 0
• 2. 2
• 3. 4
• 4. 6

Question: Klein’s construction gives a graphica construction for________________?

• 1. slider-crank mechanism
• 2. velocity polygon
• 3. acceleration polygon
• 4. four bar chain mechanism