Question: In S.H.M., acceleration is proportional to _________________?
- 1. velocity
- 2. displacement
- 3. rate of change of velocity
- 4. all of the above
Question: Inertia force acts___________________?
- 1. perpendicular to the accel< force
- 2. along the direction of accel* force
- 3. opposite to the direction of ace ing force
- 4. in any direction w.r.t. accel* force depending on the magnit two
Question: In a four-bar chain it is required to give an oscillatory motion to the follower for a continuous rotation of the crank. For the lengths of 50 mm of crank and 70 mm of the follower, determine theoretical maximum length of coupler. The distance between fix
- 1. 95 mm
- 2. slightly less than 95 mm
- 3. slightly more than 95 mm
- 4. 45 mm
Question: Kinematic pairs are those which have___________________?
- 1. two elements held together mechani-cally
- 2. two elements having relative motion
- 3. two elements having Coroili’s com-ponent
- 4. minimum of two instantaneous centres
Question: In a darg link quick return mechanism, the shortest link is always fixed. The sum of the shortest and longest link is _______________?
- 1. equal to sum of other two
- 2. greater than sum of other two
- 3. less than sum of other two
- 4. there is no such relationship
Question: In a mechanism, usually one link is fixed. If the fixed link is changed in a kinematic chain, then relative motion of other links_________________?
- 1. will remain same
- 2. will change
- 3. could change or remain unaltered depending oh which link is fixed
- 4. will not occur
Question: In its simplest form, a cam mechanism consists of following number of links___________________?
- 1. 1
- 2. 2
- 3. 3
- 4. 4
Question: An eccentric sheave pivoted at one point rotates and transmits oscillatory motion to a link whose one end is pivoted and other end is connected to it. This mechanism has___________________?
- 1. 2 links
- 2. 3 links
- 3. 4 links
- 4. 5 links
Question: Hart mechanism has________________?
- 1. eight links
- 2. six links
- 3. four links
- 4. twelve links
Question: “Open pairs are those which have__________________?
- 1. point or line contact between the two elements when in motion
- 2. surface contact between the two ele-ments when in motion
- 3. elements of pairs not held together mechanically
- 4. two elements that permit relative motion