pKmcqsquiz

Civil Engineering Mcqs

Pagination on API result
Question: For designing the dock, the proportion of ship load assumed to be borne by keel blocks is________________?
  • 1. 5/8
  • 2. 3/8
  • 3. 3/16
  • 4. 5/16
Question: A ship is berthed in a chamber and lifted by principles of buoyancy Such a chamber is called_________________?
  • 1. Dry dock
  • 2. Wet dock
  • 3. Floating dock
  • 4. Refuge dock
Question: A ship strikes the berth generally at an angle_________________?
  • 1. 90° with the face of the dock
  • 2. 45° with the face of the dock
  • 3. 30° with the face of the dock
  • 4. 10° with the face of the dock
Question: Which of the following conditions of loading imposes the greatest load on the foundation in case of dry docks?
  • 1. when the dock is empty
  • 2. when the dock is empty with the ship of maximum tonnage
  • 3. when the dock is full of water
  • 4. when the dock is dry and is under construction
Question: Which of the following are repair docks ?
  • 1. marine railways, dry docks, floating docks, wet docks
  • 2. dry docks, wet docks, floating docks, lift docks
  • 3. wet docks, floating docks, lift docks, marine railways
  • 4. wet docks, lift docks, marine railways, dry docks
Question: Which of the following type of sea walls results in greatest protection of shore structures?
  • 1. vertical sea wall
  • 2. sea wall with batter
  • 3. stepped sea wall
  • 4. sea wall with concave face
Question: When a wave strikes a vertical breakwater in deep water, it is reflected back and on meeting another advancing wave of similar amplitude merges and rises vertically in a wall of water. This phenomenon is called_________________?
  • 1. Surf
  • 2. Clapotis
  • 3. Fetch
  • 4. Swell
Question: The significant wave height is defined is the average height of the_________________?
  • 1. one – third highest waves
  • 2. one – fourth highest waves
  • 3. one – fifth highest waves
  • 4. one – tenth highest waves
Question: If H is the height of the wave expected, then the height of the breakwater is generally taken as______________________?
  • 1. 1.2 H to 1.25 H above the datum
  • 2. 1.2 H to 1.25 H above the low water level
  • 3. 1.2 H to 1.25 H above the high water level
  • 4. 1.2 H to 1.25 H above the mean sea level
Question: The difference in height between highest high water and lowest low water is called_______________?
  • 1. mean range
  • 2. maximum range
  • 3. maximum rise
  • 4. mean rise

Search

Category

Subjects