Question: Zero fuel weight of an aircraft is_________________?

• 1. equal to empty operating weight
• 2. equal to maximum landing weight
• 3. less than empty operating weight
• 4. equal to sum of empty operating weight and the maximum pay load

Question: As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed_________________?

• 1. 15 kmph
• 2. 25 kmph
• 3. 35 kmph
• 4. 45 kmph

Question: For determining the basic runway.length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is________________?

• 1. 40 %
• 2. 50%
• 3. 60%
• 4. 75%

Question: Runway threshold is indicated by a series of parallel lines starting from a distance of_______________?

• 1. 3 m from runway end
• 2. 6 m from runway end
• 3. 10 m from runway end
• 4. 15m from runway end

Question: In Intrumental landing system, the middle markers are located___________________?

• 1. along the extended centre line of runway end
• 2. about 1 km. ahead of the runway threshold
• 3. at the runway threshold
• 4. about 7 km. ahead of the runway threshold

Question: The centre to centre spacing of heliport lighting along the periphery of landing and take off area should be______________?

• 1. 2.5 m
• 2. 5.0 m
• 3. 7.5 m
• 4. 10.0 m

Question: As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are__________________?

• 1. Zero
• 2. 300
• 3. 3000
• 4. Unrestricted

Question: The slope of the transitional surface for A, B and C type of runway shall be_______________?

• 1. 1:5
• 2. 1:7
• 3. 1:10
• 4. 1:12

Question: In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than______________?

• 1. 20 m
• 2. 30 m
• 3. 45 m
• 4. 51 m

Question: The main disadvantage of angle nose out parking configuration of aircraft is that the_______________?

• 1. aircraft rear loading door is far away from terminal building.
• 2. hot blast is directed towards the terminal building
• 3. overall apron area required is more
• 4. all the above